ICX 500 Gateway
Doc.no.A100K12202
Page 24
3.3. System Configuration
3.3.1. Interfaces
There are two Ethernet interfaces on the ICX-500 Gateway,
Eth0 and Eth1
. The IP address is
set by using
CIDR notation
. It appends a slash character ("/") to the address and a decimal
number specifying the number of bits (out of the total 32 bits of an IP address) that the network
prefix consists of.
Factory Default settings are:
•
Eth0
: 169.254.1.5/16
•
Eth1
: 0.0.0.0/32 (obtain IP Address automatically - DHCP)
Enter the IP address, press
Validate
, and then
Save & Apply.
IP address and subnet mask is defined in CIDR notation
It is highly recommended to use Static IP addresses on the
ethernet ports
Examples of CIDR notation and equivalent dot-decimal notation:
•
169.254.1.5/16 is equivalent to IP address 169.254.1.5 and net mask 255.255.0.0.
•
10.5.101.30/24 is equivalent to IP address 10.5.101.30 and net mask 255.255.255.0.
