ZENEC Z-E6150, Руководство пользователя

Страница: 21 / 39

40 41
Icon Function
Mobile phone currently connected
Battery capacity of the connected mobile phone
Signal strength of the mobile network
BLUETOOTH STATUS BAR
BLUETOOTH SETUP
On the Bluetooth setup page you can adjust settings for Bluetooth operation. Press the appropriate
button / field to change any of the listed settings.
Function Icon Operation
Bluetooth
Settings
Tap to change settings related to BT operation
Auto
Connection
ON / OFF
Auto
Answer
ON / OFF
ON = Automatic call acceptance
(after 3 ring tones) activated
OFF = Automatic call acceptance deactivated
Contact
Order
1. by first name
2. by surname
Set Pin
Tap to change Bluetooth code (Pairing PIN)
Standard code: 0000
Microphone
Gain
Fine adjustment of microphone gain
ACCEPTING/ENDING INCOMING CALLS (VIA DEVICE)
In the control-/operation panel touch the numeric pad .
Key in the desired phone number in full using the numeric pad. To set up the connection, touch .
The display now changes to the call connection view.
DIAL A CALL USING NUMERIC PAD
Function Icon Operation
Accept Tap the green handset to accept the call
Reject Tap the red handset to reject the incoming call
End Tap the red handset to end the call
DIAL A CALL USING PHONEBOOK
In the control-/operation panel touch the to open the phonebook.
From the phonebook list select a contact and dial the number by touching .
After touching a contact you will be directed to the contact details view.
NOTE
Depending on the mobile phone and phonebook entries, the first synchronization can take up
several minutes.