ZEMMLER MULTI SCREEN MS 1600 Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 65

ZEMMLER MULTI SCREEN MS 1600 Скачать руководство пользователя страница 39

Operating Manual ZEMMLER MULTI SCREEN MS 1600

Shutdown

MS1600.153.19

Page

39

9

Shutdown

When machine is taken out of operation, it must run completely empty. This means that
no further screening material are fed into the machine and the conveyor belts of the two
fractions must run empty.

1. Press the "Automatic OFF" on the keypad. The belts and the trommel stops one after
the other.

2. Turn off the generator.

3. Turn off the main switch.

Notice!

The machine has to be visually checked.

9.1

Folding in conveyor belt of fine fraction

Attention!

Pay heed to the fact that there will be no persons within the working area during
fold in of conveyor belt!

This can cause injuries.

Check all security devices of their function.

Caution

– damaging the double trommel!

Pay heed to the fact that there will be no tall objects around the conveyor belt.

This can cause damage on the machine.

1. Put the crank on the rope winch (fig. 8-1)

2. The belt is folded in completely by turning the crank to the right.

3. Secure the transportation security devices.

«
...
37
38
39
40
41
...
»

Содержание MULTI SCREEN MS 1600


































































Отзывы:

Нет отзывов