Operating Manual ZEMMLER MULTI SCREEN MS 1600
Readiness for operation
MS1600.153.19
Page
32
7
Readiness for operation
Attention!
The operator is responsible for third party within the working area.
The first installation and initial operation should always be done by customer service of
Zemmler Siebanlagen GmbH.
Unauthorized installation work is forbidden.
Caution
– tilting danger of double trommel!
Installing the double trommel on soft grounds or uneven grounds may cause the
machine to tilt during operating.
Assure for enough solid and even grounds.
7.1
Installing the machine
1.
Set the double trommel on even and solid grounds.
2.
Pull handbrake which is located on the left front side of the machine.
3.
Place brake pads before or behind wheels to prevent inadvertent rolling of
the machine. The brake pads are located at the wheels; please see fig. 7-1.
4.
Lower landing gear which is located on the rear and front of the machine.
fig. 7-1: Landing gear in transportation position
Attention
– tilting danger of double trommel!
In case of soft grounds, increase contact area of support legs.