ZELTIQ CoolSculpting System, Руководство пользователя

Страница: 44 / 86

Perform a Treatment Treatment
44 BRZ-101-TUM-EN2-L
1. Remove jewelry that is in or directly adjacent to the treatment site.
CAUTION: Prepare the treatment site with an alcohol wipe.
2. Apply one pair of foam borders around the treatment site.
CAUTION: Refer to the directions for use for your foam borders.
3. Wipe the treatment site with a pretreatment skin wipe.
4. Apply a gelpad to the treatment site.
Refer to the directions for use for your gelpad.
5. Apply a liner over the gelpad.
CAUTION: Refer to the directions for use for your liner.
6. Press the
CONFIRM?
Site Preparation button.
7. Press the Next button.
The Surface Applicator Placement Cue is displayed.
►
To apply a surface applicator:
The use of this device on areas with superficially located nerve
branches, arteries, or veins has not been demonstrated to be safe and effective.
Such use may result in injury to the patient.
If the gelpad slips and the cooling surfaces of the applicator come
into direct contact with the patient ’ s skin, tissue injury may result. Inspect the
gelpad and liner to ensure that they extend beyond the outside edges of the
foam borders.
1. Place the applicator between the foam borders on the treatment site.
2. Ensure that the gelpad and liner extend beyond the outside edges of the foam borders.
3. Wrap the securement system straps around the patient to secure the applicator in place.
Refer to the securement system directions for use for information on securing
the applicator in place.
4. Press the Start button.
The Treatment Status light on the applicator shines blue.