ZELTIQ CoolSculpting System, Руководство пользователя

Страница: 35 / 86

System Overview Supplies
User Manual 35
Supplies
Card
The card provides cycles and profiles for use with the system. Each cycle provides a single treatment. The
profiles define the number of timed segments of cooling and warming. The profiles for a vacuum applicator
may include massage segments.
•
Elements of a Profile on page 37
•
Insert a Card on page 40
•
Select a Profile on page 41
Coolant
The control unit requires an adequate supply of ZELTIQ coolant. When the coolant level is low, a
Recoverable Exception
message is displayed.
Foam Borders
Foam borders minimize movement of the surface applicator during treatment. Refer to the directions for use
for foam borders.
Gasket
(CoolAdvantage Applicators)
The gasket provides a tight seal between the CoolAdvantage applicator cup and the contour.
Gel
CoolSculpting gel provides thermal contact between the applicator and the patient ’ s skin. The gel is intended
for a single use only. Refer to the gel or applicator directions for use for safety information on using gel.
Gelpad
The gelpad provides thermal contact between the applicator and the patient ’ s skin. The gelpad is intended for
a single use only. Refer to the gelpad directions for use or the CoolAdvantage instructions for use for safety
information on selecting and using gelpads.
Gel Trap
(CoolAdvantage and CoolMini Applicators)
The gel trap fits into the slot in the bottom of the applicator cup. The gel trap prevents the ingress of gel into
the vacuum system. Use a new gel trap for each treatment.
Liner
The liner provides a clean surface between the patient and the applicator and minimizes the spread of gel from
the gelpad. Refer to the liner directions for use for information on selecting and using liners.
Pretreatment Skin Wipe
Use the Pretreatment Skin Wipe (skin wipe) to prepare the treatment site before applying a gelpad. See
Surface Applicator Treatment on page 43.
Securement System
The securement system comprises a center panel and four straps. The securement system minimizes
movement of the surface applicator during treatment. Refer to the securement system directions for use.