Zelmer ZIR3300, Руководство пользователя

Страница: 15 / 84

15
PL EN
Troubleshooting
Problem Possible cause Solution
Soleplate is not heating
even though iron is
turned on.
Connection problem
Check main power supply cable
plug and outlet.
Temperature control is in “min”
position
Select adequate temperature
Iron does not produce
steam
Not enough water in tank Fill water tank
Steam control is selected in non-
steam position.
Set steam control between
positions of minimum steam and
maximum steam.
Selected temperature is lower than
that specified to use with steam.
Select a higher temperature
Spray function does not
work
Not enough water in tank Fill water tank
Steam jet and vertical
steam jet function does
not work
Steam jet function was used very
frequently within a short period.
Put iron on horizontal position
and wait before using steam jet
function.
Iron is not hot enough
Adjust to higher temperature to
steam ironing. Put iron in vertical
position and wait temperature
indicator light becomes fixed.
The iron is leaking
The temperature setting is too low
to produce steam.
The variable steam knob must be
set on position until the iron is
hot.
No proper closing of “calc’nClean”
system.
Actuate a few times the “clean”
button
White streaks come
through the holes in the
soleplate
The soleplate has a build-up of
scale because it has not been self-
cleaned regularly.
Do the self-cleaning process.
Remember to do it at least every
two weeks.