Zelmer Eco Power VC3100, Руководство пользователя

Страница: 61 / 66

65
VC3100-001_v01
15 Foam inlet filter (mounted in dust container) “CYCLONE”,
in the inlet filter HEPA frame
16 Dust container “CYCLONE” (which is a removable
segment of the vacuum cleaner)
17 Dust container cone “CYCLONE” (mounted in dust
container “CYCLONE”)
18 Switchable sucker-brush sweeper
19 Gap sucker
20 Small brush sweeper
21 Small sucker
22 “BNB” Parquet brush sweeper (Brush Natural Bristle).
Available only in case of VC3100.0HP version.
Used for cleaning and polishing of hard, scratch-sensitive
surfaces such as wood flooring, panels, parquet, marble,
tiles, etc.
Delicate and soft bristles of Natural origin provide maximum
vacuuming efficiency and protects against scratches on the
surface.
Prepare the vacuum cleaner to use
B
1 Insert the tip of the suction hose to the vacuum cleaner
inlet. The characteristic “click” indicates a properly fitted
hose.
2 The second end of the hose (a handle) connect to
telescopic suction tube.
3 Set the telescopic suction tube to the desired length by
sliding the slider according with arrow and put out / slide out
the tube.
4 On the other end of the suction tube install the
appropriate sucker or brush.
5 In switchable sucker-brush in order to vacuuming hard
surfaces - wood floors, plastic, ceramic tiles etc., pull out the
brush by pressing the switch on sucker-brush as shown on
the figure .
6 Catch the connection cable plug (3) and draw it out from
the vacuum cleaner.
Static electricity
In the process of vacuuming of some surfaces in areas of
low air humidity the device may become electrically charged.
It is a natural phenomenon – it does not damage the device,
and it is not considered to be a fault.
In order to minimize the phenomenon, we recommend you to:
discharge the device by touching metal items in the room
●
with the pipe,
increase air humidity in the room,
●
use widely available antistatic agents.
●
Structure of device
1 Outlet filter cover
2 A hook for mounting sucker-brush sweeper or telescopic
tube
3 A plug with power connecting cable
4 On/Off button and simultaneously a knob for suction
power control
5 Dust bin full indicator “CYCLONE”
6 Cable retractor button
7 An attach to unlock the dust bin “CYCLONE”
8 A handle for carrying vacuum cleaner
9 A bolt – mechanical suction power regulator
10
Suction hose
11 Telescopic suction tube with a fastening hook
12 Outlet filter “Microfilter” (mounted in a vacuum cleaner)
13 Foam exhaust filter (mounted in vacuum cleaner, in
exhaust filter cover)
14 HEPA Inlet filter (mounted in dust container “CYCLONE”).
Vacuum cleaner is equipped in one filter only ( A or B )
A Inlet filter HEPA H13 (mounted in vacuum cleaner
VC3100.0HP)
B
Inlet filter HEPA H10 (mounted in vacuum cleaner
VC3100.0SK)
A
VERSIONS OF VC3100 VACUUM CLEANERS
Styling
option and
equipment
Version
Maximum power
Adjusting the suction power
Tank full indicator “CYCLONE”
Protection against lack of HEP
A
inlet filter Inlet filter
Suction tube
Sucker-brush sweeper
Small nozzle sucker
Gap sucker
Small brush sweeper
"BNB" Parquet brush sweeper
1 2 3 4 5 6 7 8 9 10 11 12
VC3100.0SK 1600 W
+ + +
HEPA H10 Telescopic with metal base
+ + + –
VC3100.0HP 1600 W
+ + +
HEPA H13 Telescopic with metal base
+ + + +