Zelmer bm1600, Руководство пользователя

Страница: 67 / 74

71
BM1600-001_v02
Dear Customers!
Congratulations on your choice of our appliance, and
welcome among the users of Zelmer products.
Please read these instructions carefully. Pay special
attention to important safety instructions in order to prevent
accidents and/or avoid damage. Keep this User’s Guide for
future reference.
Safety operation instructions
Before starting to use the appliance, become familiar
with the whole content of this user manual.
Make sure that you understand the instructions given
below.
of defects please contact a qualified
service center.
●
Unplug the appliance when not in
use and before cleaning.
●
Switch off the appliance before
handling movable parts.
●
The cord cannot hang over the edge
of the table or counter and cannot
touch hot surfaces.
●
Use special pot holders or
a protective cloth while removing the
baking tin with the bread from the
appliance. The baking tin and the
bread are very hot.
●
Do not touch hot surfaces of the
appliance. Use pot holders. The
appliance is very hot after the end of
the baking process.
●
The temperature of accessible
surfaces may be high when the
appliance is operating.
●
Allow the appliance to cool before
dismantling and cleaning. The
appliance has a heat-insulated cool
touch housing. The metal parts
become hot during use.
●
Pay special attention while handling
the appliance, especially if it is full of
hot substances.
DANGER! / WARNING!
Risk of injury
●
This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe
way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
●
Keep the appliance and its cord out of
reach of children less than 8 years.
● Do not operate the appliance if it has
a damaged cord or if the housing is
visibly damaged.
●
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
● The appliance can only be repaired
by qualified service personnel.
Improper servicing may cause
a serious hazard to the user. In case
WARNING!
Risk of property damage
●
Plug the appliance only to a grounded electrical outlet
with the voltage corresponding to the voltage indicated
on the rating plate.
●
The appliance is not intended to be operated by means
of an external timer or separate remote-control system.
●
Always place the appliance on a flat, even surface
so it does not fall during the kneading process of
thick dough. It is especially important while using the
programmed functions and when the appliance is left
unattended. In case of extremely smooth surfaces,
place the appliance on a thin rubber pad.
EN