![background image](http://html1.mh-extra.com/html/zelmer/176-6/176-6_user-manual_3342185043.webp)
43
Safety Operation Instructions
−
.
−
−
.
−
.
−
.
−
.
−
.
−
.
−
−
−
.
−
−
.
−
.
−
.
−
.
−
.
−
.
−
.
−
.
−
.
−
−
.
Do not disconnect the plug from the socket pulling the cord
The juice extractor must be plugged to alternating current 230V grounded receptacle.
Do not start up the appliance when the supplying cord is damaged or the casing is
visibly damaged.
If the non-detachable part of the cord is damaged, it should be replaced by the
producer or at a proper service point or by a qualified person in order to avoid
any hazards.
The appliance can be refurbished by trained staff only. Improper
refurbishment can cause the serious hazard to the user. In case of any defects
occurrence, contact the qualified service agent immediately
Do not use the juice extractor when the filter is damaged
Before you start the juice extractor up, check the lid if it is locked well with the locking
bar
Do not unfasten the locking bar during juice extractor operation and the filter wiring,
as in such case the safety system will switch the appliance off
Turn off the device and unplug it from an outlet before replacing the equipment or
approaching moving parts during use
Unplug
always
before cleaning, assembling or disassembling
To push the product use the pusher only.
Do not overload the appliance with excessive amount of product or to strong pushing
(with pusher).
Switch the juice extractor off immediately, when you notice strong vibrations or
rotation decrease. Clean the filter and its casing
Stop the operation and unplug the appliance when the product is blocked in chute or
pulping blade. Unblock it.
Be especially careful with the juice extractor operation in the presence of children
Stop the operation immediately and unplug the appliance when any liquid gets into
the motor. Bring the juice extractor to the service for inspection
Do not expose the juice extractor to temperatures over 60ºC
Do not leave the appliance plugged unattended
Do not place the juice extractor on the wet surface
Unplug after operation
Do not immerse the motor in water neither clean it under running water
Do not clean the casing with aggressive detergents, such as emulsion, milk, paste,
etc. They can remove the graphic symbols such as: scales, labels, caution signs,
etc
Clean the metal parts, especially the filter including the sharp pulping blade with soft
brush
Do not use the juice extractor without the pulp collector.
To make the maintenance easier, you can put the plastic bag into the pulp collector,
which you can remove to the rubbish bin after operation
Содержание 176.6
Страница 52: ...176 145_v02...