Zeiss OPMI 1FR XY, Инструкция по эксплуатации

Страница: 72 / 114

72
Preparations for use
G-30-1416-en OPMI® 1FR XY Surgical Microscope on S7 Floor Stand Issue 4.0
Printed on 14. 11. 2007
Relocating the unit
Note:
As the stand is very easy to maneuver, there is a tendency to underesti-
mate its weight. Therefore, move the stand slowly and carefully!
Please observe the following points when relocating the stand:
• Turn off the unit at the power switch.
• Unplug the power cord from the wall outlet.
• Fold the suspension arm to its moving position (see illustration on the
opposite page).
• Wind up the cable of the foot control panel on a cable bolt and hang
the foot control panel on the handle.
• Wind up the power cord on the other cable bolt.
• Use the maneuvering handle for moving the stand.
• Be careful of heights when passing through doorways.
• Avoid collisions of any kind.
• Do not go over steps and edges: The stand might topple!
• Be extremely careful when moving over slopes.
• Do not park the stand on slopes.
• Press at least two of the brake tabs and make sure that the stand is
no longer able to roll away by itself.