LSM 510
INTRODUCTION TO LASER SCANNING MICROSCOPY
LSM 510 META
Performance Features of the LSM 510
Carl Zeiss
B 45-0008 e 10/02
3-9
e)
The analyzer slider for conventional DIC methods will be operated from the right side and is located
just below the nosepiece.
When the rod is pushed in, the analyzer is located in the beam path. In the LSM-mode, the analyzer
must
not
be located in the beam path, and the analyzer rod must be pulled out.
f)
The stands dispose of five additional ports: two side ports, front ports and base ports.
The side port or the front is equipped with the LSM 5 special interface, one of the others with the TV
interface. The LSM 510 scanning module can be mounted to the special interface port. Different camera
systems can be adapted to the TV interface using the TV adapters 452982/83/92/94/95/97/98-0000-000.
(2) Specimen stages and fine focus drives
a)
Mechanical stage
The stage with coaxial drive must be mounted on the right side of the stand.
b)
Scanning stage
c)
HRZ 200 fine focusing stage
d)
Piezo objective focus drive
(3) Transmitted-light illumination
a)
The illuminator support contains a security circuit which activates a shutter preventing laser light from
reaching the stand when the support is moved to the back. A complementary shutter built in the stand
prevents laser light from reaching the eyepieces during the scanning mode.
b)
The illuminator support is equipped with a rotary polarizer. The Axiovert description contains the
adjustment for the DIC mode during conventional observation.
For scanning in the transmitted-light DIC mode, the polarizer in the transmitted light support works like
an analyzer and must be adjusted in such a manner that direct laser light will be blocked.
The conventional analyzer slider in the stand must not be located in the beam path because the laser
light is already polarized.
c)
A fully motorized, LSM 5 software-controlled switching mirror is mounted as an option on the
illuminator support. Alternatively, the light is directed to the LSM 5 T-light detector or enables
conventional transmitted-light observation.
d)
The focusing screen for conventional transmitted-light is located in a support in front of the halogen
lamp housing.
e)
Further information on the halogen lamp and the condensers is provided in the Axiovert operating
manual.
(4) Reflected light fluorescence
With the exception of the reflector slider, all the Axiovert fluorescence accessories can be used.
Further information is provided in the Axiovert operation manual.
Содержание LSM 510 META
