Zeiss KSK 150 FC, Инструкция по эксплуатации

Страница: 55 / 92

Version 7.1
G-30-1158-en
Page 55
KSK 150 FC Operation
Starting work
 All preparations for use have been completed.
 The system has been checked using the checklist.
• Switch on the power switch on the suspension system.
• Move the suspension arm into its working position.
• Swing the colposcope into the required position.
• Adjust the brightness of the illumination system as required.
• Bring the colposcope into an ergonomic position.
• Select the lowest magnification using the adjustment knob of the magni-
fication changer.
• Set fine focusing to the mid-position.
• Look through the eyepieces and adjust the position of the colposcope un-
til the image comes into focus. This is to achieve rough focusing.
• Select the highest magnification using the adjustment knob of the magni-
fication changer.
• Look through the eyepieces and use the fine focusing adjustment knob to
bring the image into focus.
• Select the magnification required (magnification changer).
• Look through the eyepieces of the binocular tube. Adjust the eyepieces so
that both the edge of the field of view and the microscope image are
sharply focused. Also see “Setting the colposcope“.
Ending work
• Move the suspension arm upwards.
• Switch off the device when you are not using it.