Start-up
Carl Zeiss
Attaching tube
Axiostar
plus
2-8
B 40-815 e 12/01
1
Dust cap
2
Binocular tube
3
Binocular phototube
4
Hexagonal screw
5
Knurled screw
6
Threaded hole for knurled or hexagonal screw
Fig. 2-4
Attaching binocular tube / phototube 45°
2.3
Attaching tubes
One knurled screw and one hexagonal screw
each are supplied with the mount. Any of these
screws can be used to clamp the tube
(phototube) to the stand.
•
Screw the required screw into the threaded
hole (2-4/
6
) in the stand.
2.3.1
Attaching binocular tube 45°/20
ICS
•
Remove dust cover (2-4/
1
) from tube
underside. Unscrew the knurled screw
(2-4/
5
) or the hexagonal screw (2-4/
4
) from
the stand.
•
Press the binocular tube (2-4/
2
) in a slightly
inclined position to the right into the spring
of the stand.
•
Then set the tube in the dovetail of the
stand by lowering the left side. The tube is
now secured from falling out.
•
Turn the tube to the desired observation
position; both the illustrated rotation and
the 180° backward rotation are possible.
•
Tighten the knurled screw (2-4/
5
) or the
hexagonal screw (2-4/
4
).
2.3.2
Attaching binocular phototube
45°/20
ICS
•
Remove dust caps (2-4/
1
); loosen knurled
screw (2-4/
5
) or hexagonal screw (2-4/
4
).
•
Attach the binocular phototube (2-4/
3
) to
the stand mount in the same way as the
binocular tube.
•
Tighten knurled screw (2-4/
5
) or hexagonal
screw (2-4/
4
).
Artisan Scientific - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisan-scientific.com
