Installation of the AxioCam MR
AxioCam MR Instal Reference
9
NKQ= fåëí~ääáåÖ=íÜÉ=`~ãÉê~=aêáîÉê=
In order to operate the AxioCam MR the AxioVision software is needed.
First insert the PCI interface board into your computer and then install
the driver software.
dÉåÉê~ä=
Firstly we would like to emphasize a number of important points:
Allow sufficient time for installation. As a rule this will take just over five
minutes, although in exceptional circumstances considerably more time
may be necessary. The actual time you need will depend on the current
status of your computer's Microsoft
Windows operating system.
Carl Zeiss's image processing products have been developed using the
most up-to-date software tools and methods. This means that you must
first update your computer's operating system to this same standard to
ensure that things will run smoothly. The files to be installed are
contained in the enclosed installation program and are standard Microsoft
products or updates.
For some of the Microsoft update components the installation instructions
are often only available in English. If you are installing a Carl Zeiss product
in English then this presents no problems. If, however, you are installing a
Carl Zeiss product in German or another language, then the language will
change during installation if, for example, a Microsoft update component
is installed.
During installation you will have to answer a sequence of questions with
YES or NO. We have kept such questions to a minimum. Take sufficient
time to read through the questions carefully and only then decide which
answer applies.
When installing the components it is possible that some of the files to be
installed may already exist. You are informed if this is the case. You are
then asked if you want to retain or overwrite the existing files. Always
select the answers suggested by the installation program.