Installation of the AxioCam MR
8
B 48-0021 e 10.2003
mçïÉê=Åçåíêçä=
After switching on the PC the LED on the top of the camera is red. After the
first initialization the color of the LED changes from red to green.
During continuous image acquisition the color of the LED changes between
red (exposure) and green (ready).
bñíÉåëáçå=ÅçååÉÅíçê=
The camera has a data cable connector and also another wrep connection.
This connector can be used to control an external shutter via the trigger
output signals.
`ÜÉÅâáåÖ=íÜÉ=pÉíìé=
Please check the following connections:
The camera is mounted on the microscope and sufficiently illuminated.
The PCI interface board is installed in the computer.
The camera is connected to the PCI interface board via the data cable.
If the LED on the top of the camera is not now red, please check
all the points above.
Please start your computer now.