2 Safety | 2.3 Limitation of liability
ZEISS
NOTICE
To avoid equipment damage, data loss, or corrupted data, read and adhere to the safety notes
below.
4
Protect the camera against mechanical impact. External damage may affect the operation
of inner components.
4
Keep chemicals and fluids away from the camera.
4
Make sure there is sufficient ventilation of the camera head. Avoid direct exposure to sun-
light and locations near heat sources (radiators, stoves). Overheating can cause noisy im-
ages.
4
Use the camera in a clean and dry location.
4
Attach all connectors firmly and securely.
4
Use only the accessories supplied by ZEISS, when applicable.
4
Use only normal microscope cleaning material to clean the camera housing.
4
Contact your local ZEISS service organization if a repair is necessary. Do not disassemble
the camera by yourself, otherwise the warranty will be lost.
4
Save all your data, such as images, measurement data, archives, reports, forms and docu-
ments, at regular intervals on an external storage medium. Otherwise it cannot be avoided
that access to this data may be lost as a result of operational errors or hardware defects.
ZEISS accepts no liability for consequential damage resulting from insufficient data protec-
tion.
2.3 Limitation of liability
No warranty shall be assumed by ZEISS during the warranty period if the equipment is operated
without observing the safety regulations. In any such case, ZEISS shall be exempt from statutory li-
ability for accidents resulting from such operation.
2.4 Warranty
ZEISS shall be exempt from any warranty obligations should the user fail to observe the safety reg-
ulations. ZEISS only guarantees the safety, reliability, and performance of the system if the safety
notes are closely observed.
2.5 Warning labels
All points that may pose special risks are additionally marked by warning labels (pictograms) on
the camera. These warning labels indicate possible dangers. They are part of this instruction man-
ual. They are to be kept in a clean and legible state. Warning labels that are damaged or no
longer clearly legible must be replaced immediately. Always observe all warning labels on the
camera.
8
Instruction Manual ZEISS Axiocam 208 color / 202 mono | en-US | Rev. 4 | 426570-7011-001
