![background image](http://html2.mh-extra.com/html/zeiss/axio-zoom-v16/axio-zoom-v16_operating-manual_3350140008.webp)
INTRODUCTION
Carl Zeiss
Notes on instrument safety
Axio Zoom.V16
8
435080-9030-701
05/2012
1.2
Notes on instrument safety
Axio Zoom.V16 microscopes and original accessories are to be used for the microscopy
procedures described in this operating manual only. The manufacturer cannot assume any
liability for other applications of the instrument, including those of individual modules or single
parts.
Modifications and repairs to this instrument and any devices operated in combination with the
microscope are to be carried out by our service department or by authorized personnel only.
The manufacturer accepts no liability for damage caused by unauthorized access to the interior
of the instrument. Failure to comply with this shall also render any warranty claims invalid.
Set-up and operation of the Axio Zoom.V16 in conjunction with the SYCOP 3 control panel and
respective EMS 3 controller are described in a separate operating manual (Order No. 435611-
9010-701, English edition).
Set-up and operation of the Axio Zoom.V16 in conjunction with the Fluar Illuminator Z mot. for
fluorescent applications are described in a separate operating manual (Order No. 435180-9060-
701, English edition).
Instruments may only be operated by trained personnel, who must be aware of the possible
dangers involved with microscopy and the particular application concerned. The microscope is a
high-precision instrument that can be impaired in its performance or destroyed when handled
improperly.
Before setting up the instrument, check whether it is suitable for the available line voltage.
The plug-in power supply must always be disconnected from the mains socket before opening
the device!
The HIP power supply and mains plug of devices with a metal housing may only be connected
to sockets with a protective contact. The protective capacity must not be rendered ineffective
by using an extension cable without a ground wire.
The plug-in power supply should not be brought into contact with moisture.
If it is determined that protective measures are no longer effective, the instrument must be
switched off and secured against inadvertent operation. Please contact a Zeiss service agency or
the Carl Zeiss Microscopy Service to repair the instrument.
Содержание Axio Zoom.V16
Страница 1: ...Operating Manual Axio Zoom V16 Zoom microscope...
Страница 2: ......