SET-UP
Carl Zeiss
Inserting eyepieces
Axio Zoom.V16
22
435080-9030-701
05/2012
3.4
Inserting eyepieces
•
Remove the dust caps from the binocular tube.
•
Insert both eyepieces into the binocular tube by
pushing them until they engage.
Attaching fold-over eyecups
The eyepieces have rubber protection rings to
prevent the lenses from being scratched. These
may be replaced by fold-over eyecups (Fig. 7/
1
) as
desired.
•
Remove the eyeglass protection rings (Fig. 7/
2
)
from the eyepieces and attach the eyecups
(Fig. 7/
1
).
Inserting the eyepiece reticles
The focusing eyepieces are intended for use with eyepiece reticles.
•
Unscrew the existing mount (Fig. 7/
4
) with eyepiece reticle from the eyepiece without exerting heavy
radial pressure on the diaphragm unit in order to avoid deformation and jamming.
•
Replace it with a new mount containing the eyepiece reticle (Fig. 7/
3
) required.
When inserting an eyepiece reticle in the unscrewed mount, bear in mind that the writing
appears reversed before and non-reversed after screwing the mount back into the eyepiece.
The slight image shift caused by the additional path through glass is taken into account on the diopter
scale by the fact that the zero point position is indicated not by the white dot (Fig. 7/
W
) but by the red
dot (Fig. 7/
R
).
In eyepiece W-PL 10x/23 Br. foc. (455043-0000-000) and E-PL 10x/20 Br. foc. (444132-9902-000) the
eyepiece reticles (Fig. 7/
3
) have been glued to screw-in mounts for easy replacement (Fig. 7/
4
). Complete
mounts with reticles adhered can be ordered directly from Zeiss.
Fig. 7
Inserting the eyepiece reticle
Содержание Axio Zoom.V16
Страница 1: ...Operating Manual Axio Zoom V16 Zoom microscope...
Страница 2: ......