Zehntner ZOL 1150, Инструкция по эксплуатации

Страница: 26 / 36

Page 26
to calibration position” command can be wired to the
measuring head on connector J2 pin 2.
W18 External move to
measuring
position command
Indicates the logical status of the external "move to
measuring position" command. The external “move
to measuring position” command can be wired to
the measuring head on connector J2 pin 3.
W19 Position indicator Indicates the position of the Z-axis of the measuring
head. When the indicator is green the measuring
head is either in calibration or in measuring
position. When the indicator is orange, the
measuring position is not exactly known or the head
is moving between the two positions.
W20 Move to
calibration
position button
When this button is pressed, the measuring head
will move to the calibration position.
W21 Move to
measuring
position button
When this button is pressed, the measuring head
will move to the measuring position.
W22 Stop motor button When this button is pressed, the measuring head
movement on the Z-axis will stop immediately.