8
The unit must be securely mounted using all four fixing holes provided.
(see Figure 1).
2.2.2
2.3
Using screws provided, ensure
that all four fixing points on the
back plate are securely fitted. (i.e.
screwed home fully and flush with
counter-sunk hole).
Figure 1: Back Plate Screw Fixtures
Wall Mounting
2
3
4
5
6
Remove grille assembly by unscrewing
the four screws located in the four side
openings.
Decide on required fan orientation to
best suit installation position. Ensure
that the orientation arrows are facing
upwards when in either Portrait or
Landscape orientation.
Cut the duct to width of the plasterboard
or tiled wall with slight fall to exterior.
(Make provisions for cable).
To ensure the fan is in the correct
position, mount the fan with orientation
symbol arrows facing upwards.
Fill in any gaps with mortar or foam and
make good internal and external walls.
Make sure that ducting remains circular.
Ø = 117mm
1
Remove decorative insert by carefully
levering from top and bottom slots.
