7
The OF100GIP fan is supplied with a 100mm nominal spigot for connection of
ducts for installation.
100mm diameter rigid duct should be used to provide the best performance
levels required for compliance with Building Regulations. Technical Services can
be contacted on +44 (0) 1276 408402 should you have any questions in
respect of this.
Installation of the unit should be in accordance with the current editions of
Building Regulations and BS7671: IEE Wiring Regulations.
Electrical installation must only be carried out by a qualified Electrician.
Positioning / Application
The OF100GIP can be installed on a wall, window or ceiling – in either location it
can be rotated through a 90° angle to accommodate differing installation
requirements.
2.1.2
2.1.3
2.1.4
2.1.5
2.2
2.2.1
Note:
In wall / window installations to correctly
position the fan please ensure that either of the
two sets of “orientation arrows” are pointing in
the upwards direction – the arrows are located
on the back plate.