Zehnder Rittling ComfoAir 70, Руководство пользователя

Страница: 21 / 31

19
9. Push the unit into the wall mounting pipe until it stops against the back of the wall bracket. Make sure that the connection
cables are not between the EPP housing and the wall bracket.
NOTE
In the end position, the front side of the EPP housing has to line up with the front edges of the wall bracket, or at
least stand back behind it; if necessary, the wall bracket must be adjusted using spacers.
For easier insertion of the ventilation unit, it is recommended to wet the wall mounting pipe using silicone spray.
10. Pivot the lower design cover against the EPP housing. In the process, press the lower design cover slightly away from
the wall bracket in order to pivot it in front of and past the edge of the wall bracket without a collision occurring.
NOTE
Take care to ensure that the ribbon cable is located in the designated recess of the EPP housing when installing the
lower design cover.
11. Fix the lower design cover in place on the wall bracket using the two screws and put the upper design cover onto the
EPP housing.