35
3.5.5 Volume Flow Setting using OGS-Interface
Scope of delivery of the service-software package
1. Interface module OGS 3.4
2. USB-Interface Cable for OGS 3.4
3. Connection cable for interface module at CA70-control board
4. Control Software.
Instruction:
1. Install the software on your PC (On request, Software is available per mail or CD).
2. Switch off the device.
3. Connect the connection cable for the interface module to the device.
4. Connect the PC with the help of the USB-interface cable with the interface module.
5. Switch on the supply voltage.
6. Start the software (Figure 1) on your PC.
7. Under settings
COM Port, the corresponding COM Port must be set.
8. Click “Reading from device“.
9. You can now change the setting date.
10. After entering the parameter, click on “Writing to the device”.
11. Wait for approx. 5 seconds after the configuration is done.
12. You can now separate the interface module again from the device.
Fan Speed:
Standard-values for devices without two-room connection:
Содержание ComfoAir 70
Страница 1: ...Version 1 2_10 2014 EN ComfoAir 70 Operating Manual and Assembly Instruction for User and Installer...
Страница 2: ......
Страница 32: ...32 3 5 2 Assembly Template measured Figure is not scaled...
Страница 43: ......
