Zehnder Rittling ComfoAir 70, Руководство по эксплуатации и сборке

Страница: 21 / 44

21
6. Please consider that the lower side of the main device is on the wall bracket. If required, move the
frame a little upwards and screw the wall bracket tight.
7. The main device must close from the front with the front edge of the wall bracket or be somewhat
behind it. If this is not the case then separators (moving or similar spacer) can be brought under the
assembly points of the wall bracket till the device is in a specific position of the wall bracket.
8. Please note that the cable of the control unit is immersed in the cable duct and fix the lower Design-
cover hoods with 4 screws at the wall bracket.
Tip: For a simple assembly, first fix only the front left
screws. The lower Design-cover hoods are now swinging – the cable is easier to connect.
9. Set the upper Design-cover hoods from above to the device. Please note that this is locked both in
the guiding of the lower design-cover hoods as well as on the upper part of the case with the guide
pins.