Zehnder Rittling ComfoAir 180, Руководство пользователя

Страница: 2 / 32

2 - EN
Foreword
Read this document carefully before use.
This document provides all the information required
for safe and optimal installation of the ComfoD 180
and ComfoAir180. In this document they will be
referred to as “the unit”.
The unit is subject to continuous development and
improvement. As a result, the unit may slightly differ
from the descriptions.
The following pictograms are used in this
document:
Point of attention.
Risk of:
- damage to the device;
- performance of the device is compromised if
instructions are not observed carefully.
Risk of personal injury for the user.
Maintenance
Questions
Please contact the supplier if you have any questions
or would like to order a new document or new filters.
The contact details of the main supplier(s) can be
found in the user manual.
The contact details of the manufacturer can be found
in the back of this document.
The following information can be found in the
user manual:
User Information
General information about the ventilation system.
Operating devices available for the unit.
Warranty and liability conditions.
EEC declaration of conformity.
How to maintain the filters of the unit.
How to maintain the valves of the ventilation system.
The following information can be found on the
identification plate:
Meaning of the suffixes
ComfoAir Product family name.
ComfoD The unit has a display installed as default.
180 Product type name.
(Air volumes in m3/h)
Luxe The unit has no display.
Enthalpie The unit has an enthalpy exchanger installed
as default.
ERV The unit has an enthalpy exchanger installed
as default.
PH The unit has a pre heater installed as default.
V The unit has a pre heater installed as default.
All rights reserved.
This documentation has been compiled with the utmost care. The publisher cannot be held liable for any damage
caused as a result of missing or incorrect information in this document. In case of disputes the English version of
these instructions will be binding.