17
Table of contents:
page
Declaration of Conformity
17
1
8
18
18
18
1
8
19
19
19
19
19
19
19
20
20
20
20
20
2
3
27
27
27
1.
General
1.1 Application
1.2 Queries and ordering
1.3 Technical data
1.4 Areas of application
2.
Safety
2.1 Marking of information in the instruction for use
2.2 Personnel qualifications
2.3 Dangerous arising due to non-compliance with safety advice
2.4 Safety conscious working
2.5 Safety information for owner / operator
2.6 Safety information for maintenance, inspection and fitting
2.7 Non-manufacturer modification and spare part production
2.8 Unauthorised usage
3.
Description
3.1 Description pump WX
3.2 Description booster set HAE
3.3 Description booster unit HWX
4.
Installation and commencement of operation
5.
Service / Maintenance
6.
Warranty
7.
Disposal
8.
Technical Modification
9.
Fault, possible reason and recovery
Appendix
Spare part list
Spare parts drawing
30
______________________________________________________________________________________________________
Declaration of Conformity
We the following
ZEHNDER Pumpen GmbH
Zwönitzer Straße 19
08344 Grünhain-Beierfeld,
declare that the pump
Series
WX/
HAE/
HWX
conform the following specifications:
- EEC-low voltage specifications 2014/35/EU
- EMV-Specifications 2014/30/EU
- In accordance with 2006/42/EG
Applied harmonised norms, particularly
EN 60335-1:2012/A11:2014
EN 60335-2-41:2003/A2:2010
EN 809:1998/AC:2010
EN 55014-1:2006/A2:2011, EN 55014-2:1997/A2:2008
EN 61000-3-2:2014, EN 61000-3-3:2013
EN 61000-6-1:2007, EN 61000-6-2:2005, EN 61000-6-3/A1:2011, EN 61000-6-4/A1:2011
Grünhain-Beierfeld,
12
.
07
.201
8
Matthias Kotte
Product development manager
_________________________________________________________________________________________________________________
Installation pressure gauge!
To avoid damages we deliver the pressure gauge separately. Please mount this pressure gauge at the marked position in the order as follows:
- Remove dummy plug
- Screw in pressure gauge with O-ring and nut (O- ring between pump housing and nut)
- Tie up the nut after adjusting the pressure gauge.
GB
27
2
8
2
8
2
9
