ZeeVee ZyPerMX, Руководство пользователя

Страница: 22 / 42

16
The Target Video Bitrate GH¿QHVWKHELWUDWHDWZKLFK\RXZDQWWKH=\3HU0;WRWU\
and use, as a relative average.
%RWK67%DQG3&GHYLFHVZLOOYDU\LQWKHLUDELOLW\WRKDQGOHGLIIHUHQWELWUDWHV
7KH=\3HU0;H67%ZLOOKDQGOHDSSUR[LPDWHO\NLORELWVVHFRQG/DSWRSVFDQ
handle anywhere from 2000 kilobits / second to a 10000 kilobits / second. It is
recommended to set this value to
6000
. The value can then be adjusted depending
upon the capability of the endpoint.
5. Click the Audio Encode drop-down list and select the audio encoding method.
Type Description
LPCM /3&0LVDWZRFKDQQHOXQFRPSUHVVHG³ORVVOHVV´DXGLRIRUPDW
DQGVKRXOGEHXVHGZKHQEDQGZLGWKLVOLPLWHGDWWKH67%RU3&
endpoint. Multichannel HDMI audio is downmixed to two-channel
audio.
AAC $$&LVDPXOWLFKDQQHOFRPSUHVVHG³ORVV\´DXGLRIRUPDWWKDWVKRXOG
be used when multichannel HDMI audio is desired on the decoder
endpoint. Due to the larger bandwidth required by AAC, be sure that
WKH67%RU3&FDQKDQGOHWKHGDWDVWUHDP
6. Click the Target Audio Bitrate GURSGRZQOLVWDQGVHOHFWWKHGHVLUHG³WDUJHW´
audio bit rate.
The
Target Audio Bitrate GH¿QHVWKHDXGLRELWUDWHDWZKLFK\RXZDQWWKH=\3HU0;
to try and use, as a relative average.
The default setting is
240 kilobits/sec
which provides broadcast-quality IP
VWUHDPVDQGLVPRUHWKDQDFFHSWDEOHIRUPRVW67%DQG3&GHYLFHV7KH Target
Audio Bitrate should only be reduced when a minimal audio stream is required.
In most cases, this will not be necessary.
Basic Operation