Seite 11/69
Page 11/47
JMA-Optic
2.2.4. General safety information
■
The use and operation of the system and the evaluation of measurement data and
its interpretation should only be carried out by trained specialist personnel.
The manufacturer assumes no liability for damage to persons or property, or the loss
of data that may occur due to the improper use of the software, the device, or its accessory parts.
■
Patients and measurement data may only be copied, moved or deleted with the help of the
database function that is provided by the zebris software application. In the case of the
deliberate changing of data without the database function, the user alone bears the full risk.
■
Before reinstalling and updating the software, a backup of the database must be created. After
data records have been imported, the integrity of the database must be validated by the user.
■
All measurement and/or analysis results should always be interpreted by a trained specialist and
checked for their relevance in consideration of the clinical medical history of the patient and in the
context of the further diagnostic procedure. If invasive measures are taken, the measurement
system should only be used as an additional assessment method. Under no circumstances can or
should invasive surgery or measures that put the patient at risk be carried out based on the
measurement results alone.
■
The measuring system must be checked at regular intervals to make sure it is functioning
properly. More details on this can be found in the section:
7 Funktional checks and disposal, p.31
in this user manual.
■
Ensure that all power and connection cables are routed and protected so that nobody is able
to trip over them. Check all cables and connection plugs regularly for damage. Damaged power
supply units, plug connectors and cables must be replaced before further use.
■
The measurement system is not protected against the penetration of fluids. If fluid penetrates
the measurement system, switch it off and please contact the technical service team of your sales
partner.
■
Never insert objects into components of the measurement system.
■
Before starting every measurement, it is necessary to ensure the correct choice and correct position
face bow and lower jaw sensor. The cables or the application aids can present a risk of injury to
the patient. In this context, please consult the special instructions in the handbooks of the appli-
cation software, and do not allow children or mentally impaired patients to enter the proximity
of the device without supervision.
Содержание JMAOptic
Страница 1: ...User Manual and technical data JMAOptic...