zebris Medical GmbH
Canid Gait Technical Specifications and User Manual
Page 8/33
3.4
General safety instructions
The application and operation of the system and also the evaluation of the measuring
data and their interpretation may only be carried out by trained qualified personnel. The
manufacturer assumes no liability for any injury to persons, damage to property, loss of
data or injury of animals, due to improper use of the software, the device or its component
parts.
The patients’ data and measuring data may only be copied, moved, or deleted using the
database function provided by the zebris application programs. In the case of data being
changed intentionally without using the database functions, the user alone bears the full
risks involved.
Measurement and analysis results should always be interpreted in the light of the clinical
history of the patient and in the context of other diagnostic tests by a trained person
proven and tested for their relevance.
Should there be any detectable damage to the device or component parts, they should
be returned to the manufacturer for a safety check. It is not permissible to continue using
the device or its component parts, as severe damage and serious injuries
– even lethal
injuries - may result. The manufacturer or authorized sales partner must always be con-
tacted in all cases of fault or doubt.
If any fluids should penetrate the device, it is mandatory for the device to undergo a tech-
nical, safety test. Damaged plug connections and leads are to be replaced by an author-
ized service technician. The device must be put out of operation immediately, marked as
"Not working“ and prevented from being used by removing the mains cable. Please refer
to an authorized technician immediately.
Be sure that all the mains and connection cables are laid safely and that they are pro-
tected against stepping on, so that nobody can trip over them. Check all the cables and
the connection plug regularly for any damage. Damaged power supplies and cables have
to be replaced before further operation.
Never insert any objects in the components of the measuring system.
