ZDC ZA-5000 User's Manual V2.2.5
Chapter 5 Management
Page 40
To change the password, Type the old password. The default password for the Access Point is:
password. Type a new password and type it again in the Repeat New Password box to confirm it.
Click Apply to have the password changed or click Cancel to keep the current password.
Be sure to write it down in a secure location and the maximal length of the password is 19
characters.
Firmware Upgrade
There are two kinds way to upgrade Access Point software.
z
By WEB
.
Figure 37 Firmware Upgrade
1.
Open Upgrade Firmware page.
2.
Click browser button and select the firmware file in local hard disk.
3.
Click Upload button.
4.
After upgrade, login again and check the software version.
z
By FTP
1.
FTP 192.168.0.228(the AP IP address), input user (admin) and password (password).
2.
After login in, input command “put zag5000.rmt”. Then the upgrade is going on
automatically.
Содержание Air Access ZA-5000 Series
Страница 1: ...ZDC ZA 5000 User s Manual V2 2 5 Page I ZA 5000 Series ZA 5000 I ZA 5000 E User s Manual V2 2 5...
Страница 4: ...ZDC ZA 5000 User s Manual V2 2 5 Page IV FCC DECLARATION OF CONFORMITY...
Страница 5: ...ZDC ZA 5000 User s Manual V2 2 5 Page V...
Страница 6: ...ZDC ZA 5000 User s Manual V2 2 5 Page VI Europe EU Declaration of Conformity...
