ZDC ZA-5000 User's Manual V2.2.5
Chapter 4 Advanced Configuration
Page 36
Notice
1.
Set Operating Mode as AP mode in Wireless Settings page.
2.
Open AP Settings page, set basic information.
Figure 31 AP Settings
z
Wireless Network Name (SSID)
Enter a 32-character (maximum) Service Set ID in this field; the characters are case sensitive.
When in infrastructure mode, this field defines the Service Set ID (SSID). The SSID assigned
to the wireless node is required to match the SSID in order for the wireless node to
communicate with the Access Point.
z
Beacon Interval
Specifies the interval time (20~~1000ms) for each beacon transmission.
z
DTIM Interval
The Delivery Traffic Indication Message, Specifies the data beacon rate between 1 and 255.
Because the limitation of wireless network, you can realize security by authentication, data
encryption and access control. At the same time, you can use wireless client security
separator to protect client. The detail is list in
Wireless Security Settings
,
Wireless Access
Control
and
Wireless Isolation
.
“AP + Bridge” Mode Application
In “AP + Bridge” mode, you can use it both wireless bridge connection and wireless hotspot
cover.
Содержание Air Access ZA-5000 Series
Страница 1: ...ZDC ZA 5000 User s Manual V2 2 5 Page I ZA 5000 Series ZA 5000 I ZA 5000 E User s Manual V2 2 5...
Страница 4: ...ZDC ZA 5000 User s Manual V2 2 5 Page IV FCC DECLARATION OF CONFORMITY...
Страница 5: ...ZDC ZA 5000 User s Manual V2 2 5 Page V...
Страница 6: ...ZDC ZA 5000 User s Manual V2 2 5 Page VI Europe EU Declaration of Conformity...
