38 / 74
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 07/06/2019 Rev. 1.1 “User Manual for 20K-33KTL”
Figure 33 – Assembling the communication connector
4)
Crimp the plug using the RJ45 crimping tool.
5)
Insert the plug into the RS485 port on the inverter.
6)
Insert the cable seal in the lodging and tighten the nut.
Figure 34 – Assembling the communication connector
Removal procedure
Remove the RJ45 connector from the inverter by removing the plug. Then press the clip on the RJ45
connector and pull out the RJ45 connector.
Communication via Wi-Fi connection
To allow the inverter to communicate via Wi-Fi, it is necessary to equip the machine with a special
Wi-Fi adapter.
To use the Wi-Fi Communication, connect the inverter to a data acquisition device such as a
router, Wi-Fi modem or Wi-Fi network extender.
Procedure
1)
Remove the waterproof cover using a screwdriver.
