26 / 74
Identificazione: MD-AL-GI-00
Rev. 4.0 del 31.01.18 - Applicazione: GID
Manual of 07/06/2019 Rev. 1.1 “User Manual for 20K-33KTL”
3.6.
Installing the 20K-33 KTL inverter
1)
Correctly position the mounting bracket on the wall using a level to ensure that it is straight; mark the six
holes using a suitable marker pen. Keeping the hammer drill perpendicular to the wall and avoiding any
sudden movements when drilling, drill the six holes at the points marked on the wall using a 8 mm drill
bit. In case of errors during drilling, it is necessary to reposition the holes.
2)
Insert the plugs horizontally into the holes made, paying attention to the force and depth with which
they are inserted (make sure the plug completely enters the hole).
3)
Align the mounting bracket with the position of the holes and fix it to the wall using the most suitable
screws and flat washers, tightening them properly.
4)
Place the inverter on the mounting bracket
5)
Secure the inverter to the mounting bracket with the M4 bolt to ensure stability.
6)
(OPTIONAL) Depending on the customer’s requirements, the inverter can be locked to the mounting
bracket with a safety lock (not supplied with the kit).
Figure 16 - Steps for installing the inverter on the wall
