10.1.2 AZZURRO HV BATTERY SETTINGS ON INVERTER - 1 BATTERY TOWER
Set the battery channels in the inverter according to the configuration of the battery towers.
Configure the
inverter channels:
Basic settings
Channel configuration:
When connecting
1 Azzurro HV tower
:
o
Input channel 1 – BAT input 1;
o
Input channel 2 – Not used.
To set the
battery parameters
:
Advanced settings
0715
Battery parameters:
When connecting
1 Azzurro HV tower
:
- Battery 1:
o
Type: HV ZBT; Depth of discharge: 80%.
- Automatic addr. cfg:
o
Check the total number of batteries in the installation. The configuration will take about
30 seconds, after which the OK message appears.
BATTERY 1
1.Battery type
HV ZBT
5.Depth of Discharge
80%
6.Save
