(B) “Event List” Interface as below:
Event List is used to display the real-time event records, including the total number of events
and each specific ID No. and happening time. User can enter Event List interface through
main interface to check details of real-time event records, Event will be listed by the
happening time, and recent events will be listed in the front. Please refer to below picture:
Users press “Back” button and “Down” button in standard interface, then enter into 2.Event
List” interface.
Press “OK” button to get the total event numbers, show as below:
Press ”OK“ button again; user can check each event ID number and happening time, see below:
Events TotalNum:02
2.EventList
Events AllNum:02
91
ID
2013-10-31 16:42
EventID NO.
Happening time
Key
”
“OK
Key
”
“OK
Key
”
“OK
53
54
Setting Q(v)
Users press Back button to enter “1.Enter setting” interface, Press OK button to enter main
setting interface. Enter “20. Setting Q(v) by pressing “Up” button Or “Down” button, then
press “OK” button . Then press Confirm button to start to set Q(v)."Success" will be shown on
the screen after a successful Q(v) setting.
“
”
Users press Back button to enter “1.Enter setting” interface, Press OK button to enter main
setting interface. Enter “21.Control 81.S1 by pressing “Up” button Or “Down” button, then
press “OK” button. Then press Confirm button to start Control 81.S1.
“
”
Control 81.S1
Setting P(f)
Users press Back button to enter “1.Enter setting” interface, Press OK button to enter main
setting interface. Enter “19. Setting P(f)” by pressing “Up” button Or “Down” button, then
press “OK” button and enter “Setting P(f)”interface. Then press Confirm button to start to Set
P(f). "Success" will be shown on the screen after a successful P(f) setting.
“
”
(
C)
“SystemInfo” Interface as below:
3
.
SystemInfo
1.Inverter Type
2.Serial Number
3.SoftVersion
4.HardVersion
5.Country
6.Input Mode
7.Relay Command
8.Safety Paras
9.Power Factor
10.Reflux
Inverter Type
Serial Number
SoftVersion
HardVersion
Users press Back button and Up button or Down button enter “3. SystemInfo”
interface, Press “OK” button to enter enter into system information checking interface,then
press “Up” button or “Down” button enter into “1. Inverter Type”,then press “OK” button
，
the Inverter Type will be displayed.
“
”
“
”
“
”
Users press Back button and Up button or Down button to enter “3. SystemInfo”
interface, Press ”OK“ button to enter enter into system information checking interface,then
press“Up” button or “Down” button enter into “2. Serial Number”,then press “OK” button
,the serial number will be displayed.
“
”
“
”
“
”
Users press Back button and Up button or Down button to enter “3. SystemInfo”
interface, then Press “OK” button to enter enter into system information checking
interface,then press “Up” button or “Down” button enter into “3. SoftVersion”,then press
“OK” button
，
the SoftVersion will be displayed.
“
”
“
”
“
”
Users press Back button and Up button or Down button to enter “3. SystemInfo”
interface, then Press “OK” button to enter enter into system information checking
interface,then press “Up” button or “Down” button enter into “4. HardVersion”,then press
“OK” button
，
the HardVersion will be displayed.
“
”
“
”
“
”
11.P(f)
12.Q(v)
20~33KTL-G2
User manual
20~33KTL-G2
User manual
