ZCS 20000TL-G2, Руководство пользователя

Страница: 27 / 36

Clear Produce
Clear Events
Set Country Code
(A) “Enter Setting” Interface as below:
Set Time
Users press “Back” button to enter “1.Enter Setting” interface, Press “OK button to enter
main setting interface. Enter “1. Set Time” by pressing“Up” button or “Down” button, then
press”OK“button and start to set up time.
Time set from year, month, day, minutes, and seconds in turns, “Up” button or “Down”button
to choose different value to set each date. Set each value is need to press “OK” button to
confirm setting. “success” is displayed if the setting time is correct, “fail” means failure
settings.
”
Users press “Back” button to enter “1.Enter Setting” interface, Press OK button to enter
main setting interface. Then Enter “2.Clear Produce” by pressing “Up” button or “Down”
button, press “OK” button and start to clear produce. “success” is displayed after settings. “ ”
Users press “Back” button to enter “1.Enter Setting” interface, Press OK button to enter
main setting interface.Enter “3. Clear Events” by pressing ”Up” button or “Down” button.
Press “OK ”button and start to clear events. “success” is displayed after settings. “ ”
Users press “Back” button to enter “1.Enter setting” interface, Press OK button to enter main
setting interface. Enter “4.Set Country Code” by pressing “Up” button Or “Down” button,
press “OK” button and enter “Input Password” Setting interface (default: 0001). If it's shown
"set disable" on the screen, then you can NOT choose the operating country, you should
enable country setting through "7. Enable Set Country" interface. If it's shown "set Country
code?" on the screen, then press Confirm button to start country setting. "Success" will be
shown on the screen after a successful country setting.
User can check current country code in SystemInfo>>5. Country.
Note: Country code changing will take effect after inverter reboot.
47 48
Table 6-1 country code setting
1
.
Enter Setting
1. Set time
2. Clear Produce
3. Clear Events
4. Set Country Code
5. On-Off Control
6. Relay Command
7. Enable Set Country
9. Set Mod-bus Address
8. Set Total Energy
10. Set Inputmode
11. Set Language
12. Set StartPara
13. Set SafetyVolt
14. Set SafetyFreq
15. Set Insulation
16. Relay Test
17. Set Reactive
18. Set PowerDerat
19.PE Line Control
20.Set Refluxp
21.Setting P(f)
22.Setting Q(v)
23.Control 81.S1
20~33KTL-G2
User manual 20~33KTL-G2
User manual