Zaxcom ZMT3 Phantom 2 Specifications
31
Specifications
Transmitter
Power output: 25 / 50 / 75 mW – Firmware Selectable
RF Modulation: Proprietary Digital Method
RF Frequency Step: 100 KHz
RF Bandwith in ZHD48 Mode: 50 KHz
RF Bandwith in ZHD96 Mode: 100 KHz
RF Bandwith in XR Mode: 200 KHz
RF Frequency Range: ZMT3 PHANTOM.5: 512 - 614 MHz
ZMT3 PHANTOM.6: 596 -698 MHz
Antenna Connector: 50 Ω
SSMA Female
Emission Designator: 180 KV2E, 100 KV2E, 50 KV2E
FCC Part: 74.861
Audio
A-D Dynamic Range: 110dB
Mic input Impedance: 6.8 k Ohms / (680 Ohms with 12V power mode)
Distortion: 0.002%
Frequency Response: Mode 0: 20 Hz to 16 kHz / T & M Mode 0.2 Hz to 16 kHz
Unbalanced Lav Power 3.3V @ 10mA max.
Mic Power (User Selectable): 12V Phantom (@ 50mA Max), 24V Phantom (@ 10mA Max), 36V Phantom (@ 10mA
Max), 48V Phantom(@ 10mA Max)
Mic Connector: 3-Pin Micro LEMO
Mic Configuration: Balanced/Unbalanced (2 wire)
ADC Bit-Depth: 24 Bits
Time code Reader/Generator
Clock Accuracy: 1.54PPM (1 Frame Out in 6 Hours)
Time code Type: SMPTE
Time code Frame Rates: 23.98, 24, 25, 29.97NDF, 29.97DF, 30NDF, 30DF
Recording
Media: Micro SD Card (Flash Memory)
File Format: .ZAX convertible to BWAV, MP3
Recording Time: Up to 216 Hours (16 GB card)
2.4 GHz ZaxNet Receiver
RF Frequency Range: 2.403 to 2.475 GHz
RF Modulation: Digital Spread Spectrum
RF Frequency Step: 0.001 GHz (1 MHz)
RF Bandwidth: 1 MHz
Channel Separation: 2 MHz
Sensitivity: -96 dBm
Physical
Weight: 2.2 ounces (62.3 grams) with battery
Dimensions (H x W x D): 2.25 X 1.5 X .55 inches (57.1 X 38.1 X 13.9 mm)
Display: Graphic OLED
Runtime: Up to 5 Hours (depending on the microphone used)
All Specifications are subject to change without notice.
