Zaxcom ZMT3 Phantom 2 Wiring Diagrams
27
Inputting Audio
The ZMT3 Phantom 2 use a balanced microphone input via a 3-pin micro-LEMO connector.
An unbalanced dynamic microphone or a powered lavaliere can also be used.
Recommended Microphones
Zaxcom recommends the following microphones for use with the ZMT3:
Countryman EMW, B3, B6, Sanken COS-11D, DPA 4063
Wiring Diagrams
The following 3-pin micro-LEMO connectors mate with the microphone connector:
•
FGB.00.303.CLAD.22 – has a latch with a pull release.
•
FVB.00.303.NLA – has a latch with a twist release.
Please note it is required that the ground gets attached to the shell of the LEMO connector.
Two Wire Lavalier Microphone Configuration
Three Wire Lavalier Microphone Configuration
Please contact the microphone manufaturer.
Microphone Input Configuration
XLR
Lemo
PIN 1
PIN 1
PIN 2
PIN 2
PIN 3
PIN 3
