Chapter 2
_____________________________________________________
Zaxcom Nomad User’s Manual
42
REMEMBER MIRROR SETTINGS AFTER POWER CYCLE
button
– this setting allows Nomad to STAY in
mirror mode even after it has been powered off. If this option is set to
OFF
, any time you power down Nomad it
changes the
MIRROR CF MODE
button
} to
OFF
.
Erase Mirror Card page
Page purpose:
This page allow the Operator to format the currently installed mirror media.
How to get here:
(
MENU
knob
once
My Nomad
button
Mirror CF
button
Format Mirror Card
button
)
Figure 2-35 Erase Mirror Card page
Fader Assign page
Page purpose:
This page controls which fader(s) are assigned to which input(s).
How to get here:
(
MENU
knob
once
Fader Assign
button
)
Figure 2-36 Fader Assign page
In the example above, fader 1-5 are set to control the fader functions of the channels 1-5. Fader 6 is set to
control the input trim of channel 6.
The 6 hardware faders are routed with the fader routing matrix. Analog inputs 1-6, digital inputs 1-8 and analog
trim controls can be routed to the faders. Because the Nomad has a digital mixer, no actual audio is going through
the Nomad fader controls allowing for complete flexibility for the mixing hardware faders. Return inputs 7-10 may
be used as line level inputs and are mixed with the virtual faders in the 6-Channel Mix Home page (see
}) and cannot be assigned to a hardware fader.
IMPORTANT:
do not assign more than one fader to each channel.
NOTE:
while using a multiple-element mic (i.e, stereo, surround, etc.) assign all of the channels to one master
fader and adjust each channel with the input channel trimmers. While doing this, you need to disable the
Auto-trim function (see
}) as it is unreliable.
