Chapter 2
_____________________________________________________
Zaxcom Nomad User’s Manual
30
Output Bus Assign page
Page purpose:
These pages control which analog inputs are routed to specific output bus(ses).
How to get here:
(
BUS
key
Output Bus Assign
button
)
Analog Inputs view
Auxiliary Inputs view
Digital Inputs view
Figure 2-13 Output BusAssign pages
To move between the three views, press the
BUS
key
.
Collectively, the top line of the three pages indicates the following sources:
(
1
–
6
)
– six mic/line-level inputs
(
R1
–
R4
) – four line/return
(
S
)
– slate mic (press the
SLT
key
)
(
C
)
– comm mic (press the
COM
key
)
(
T
)
– tone generator
(
1
–
8
)
– eight digital inputs
The output busses are in a vertical line on the right.
Rotate the
MENU
knob
to scroll through the matrix. Stop in the matrix, at the intersection of the input channel and
output channel, where you want to send that specific input. Press the
MENU
knob
to cycle through the available
crosspoints, which are:
Blank
– no connection
X
– post-fader
P
– pre-fader
X
w/ line on top – post-fader, phase inverted
P
w/ line on top – pre-fader, phase inverted
NOTE:
To add the optional phase invert items to the list, press the
STAR
key
.
This is a global action. Once enabled in one page, all pages that can include inversion will also have it enabled.
This will reset to NO INVERSION mode when the unit is power-cycled.
Bus routing is fully cross faded so the selection may be changed while in Record mode.
Some crosspoint selections are colored red. RED items in any matrix page indicates an input is not available
(mostly due to the way the input configure page is setup).
