Deva24 Right Side Panel
9
Right Side
1.
Front panel headphone output (1/8” stereo jack)
This connector mirrors the 1/4” main headphone connector
2.
Analog inputs 7 thru 12 (TA-5M)
These inputs are switchable between line level and mic level. These inputs have patented NeverClip preamps
with 136dB of dynamic range.
3.
External Power Connector (Hirose-4F) X 2
These are redundant power inputs which will seamlessly switch to the supply with the higher voltage.
Deva 24 will operate on 10 to 18 VDC {1/2 A @ 12 VDC}
WARNING:
Do NOT use a source higher than 18.0 VDC. Doing so can damage the unit’s power supply.
4.
Front panel slate microphone input (1/8” (3.5mm) TRS)
5.
Outputs 1 - 6 (TA-5M)
Outputs 6 channels of audio via output buses 1 thru 6
6.
Returns 1 - 4 (TA-5M)
These inputs accepts a headphone level or line-level signal (Range: -20dBu and +30dBu)
•
Line level analog inputs 13 thru 16
•
These inputs can be used as returns. Each input is independent so audio can be monitored from four
different sources
7.
Headphone #1 (1/4” stereo jack)
Main headphone out
8.
External Slate Microphone input (1/8” (3.5mm) TRS jack)
This is where the external slate microphone is plugged into.
9.
Headphone #2 (1/8” (3.5mm) TRS jack) Buses 7 / 8
10.
Mono Output (1/8” (3.5mm) TRS jack) Bus 10
11.
Tape Output (1/8” (3.5mm) TRS jack) Bus 9
12.
Outputs 1 - 4 (XLR-3M)
Outputs 4 channels of audio via output buses 1 thru 4
13.
DC Output (Hirose 4-F)
Supplies DC power to another device (1 amp max)
1
2
12
9
4
5
6
7
11
8
10
3
13
