Zaxcom Deva 24 Pressing the ZNET Key
47
Pressing the ZNET Key -
Future Feature
Pressing the ZNET key opens the menu for the internal ZaxNet transmitter.
Setting the transmitt frequency
The TX frequency sets the operating frequency of the internal ZaxNet transmitter.
This is the frequency that Deva 24 transmits IFB audio, time code and ZaxNet
commands on. The ZaxNet frequency range is from 2.403 to 2.475 GHz. All ERX
receivers and wireless transmitters receiving ZaxNet will need to be set to this
frequency.
Setting the ZaxNet power level
This POWER LEVEL key sets the power level of the internal ZaxNet transmitter. The ZaxNet transmitter will adjust
from 1 to 10 with 10 being the highest.
Power roll enable
The POWER ROLL key enables the power roll function on Deva 24.
Power roll allows the transmitters, which are being controlled via ZaxNet, to increase its output power level when
Deva 24 goes into record, and decrease to a lower power setting when recording stops. Decreasing the power level
when not recording allows the transmitters to conserve battery power. To use power roll, the power-roll setting on
the wireless transmitter must be set to “Deva Trigger”.
•
LOW
- When low is selected the wireless transmitter(s) will manually go into the low power setting.
•
DYNAMIC -
When dynamic is selected the wireless transmitter(s) will run at low power when Deva 24 is not
recording and automatically go into high power when Deva 24 goes into record.
•
HIGH -
When high is selected the wireless transmitter(s) will manually go into the high power setting.
Transport control enable
When transport control is set to ON, all transmitters that are being controlled via ZaxNet will to go into record when
Deva 24 starts recording, and stop when Deva 24 stops recording.
If transport control is set to OFF the transmitters internal recorders will not be affected by state of Deva’s record
status.
Group Code
This GROUP CODE key sets the group code that the internal ZaxNet transmitter will be sending commands on. Please
note the group code number set here needs to match the group code number on the transmitters being controlled
from the Deva 24.
Transmitter
Turns on and off Deva 24’s internal ZaxNet transmitter.
