Zaxcom Deva 24 Скачать руководство пользователя

Страница: 11 / 67

MAIN MENU Meter Screens

Home Screen

Transport status -

Displays the status of the recorder. Tapping on the transport status key is a shortcut to the

main menu.

Headphone status -

Displays what audio is being sent to the headphones. Tapping on the headphone status

key is a shortcut to the headphone routing matrix.

Voltage -

Displays the incoming voltage of the power supply that is powering the Deva 24. If Deva 24 has a

power supply connected to both DC power inputs, the input with the higher voltage will be the one that is

powering the Deva 24 and that will be the voltage that is displayed.

Track Meters -

Shows the record tracks levels in dBFS.

Please note that the number of track meters displayed can be adjusted in the mode menu - this example shows

16 tracks.

•

If the track is named that track name will be displayed within the meter.

•

If there is a horizontal line going through the track, that is showing that track is not record enabled. If a track

is record enabled there will be a red dot to the left of the meter.

As short cut hold the shift key and tap the track will record enable that track.

•

If the compressor is engaged there will be a white line going from the right to the left showing the

compression.

•

Tap on the track will isolate that track to the headphones.

Time Code -

Displays the time code. This is user selectable to show the time code from either the time code

generator or the card. Tapping on the time code key is a shortcut to the time code menu.

Record time

Displays the time left on the primary media.

MixAhead

Displays time in milliseconds of the MixAhead feature.

Sample Rate / Frame Rate / Pre Record time

- Displays sample rate, time code frame rate and pre-record

buffer time.

Record media information

- Displays the remaining capacity on the primary and mirror media, the percentage

of the file that is being mirrored and what file number of the folder is being mirrored.

10.

Segment -

Displays the current segment being recorded and the folder it is being recorded to.

11.

Scene / Take / Note -

Displays the current scene, take and note metadata. Tapping on the key opens the

metadata management screen.

Содержание Deva 24




































































Результаты поиска

Содержание Deva 24

Отзывы:

Похожие инструкции для Deva 24

Бренды по названию

Популярные бренды

Zaxcom Deva 24, Руководство пользователя

Результаты поиска

Содержание Deva 24

Отзывы:

Похожие инструкции для Deva 24

Бренды по названию

Популярные бренды