Zavio 8HDD Series Скачать руководство пользователя страница 56

Страница: 56 / 99

RAID Status

Delivers the following statuses of the RAID volume:

Message

Description

Functional

The RAID volume is normally operating.

Critical

There are problems with the RAID volume, but video recording is normal.

Offline

The RAID volume cannot be found. Hence video recording is stopped and
the storage cannot be accessed.

File system
error

The RAID volume is found but isn’t mounted. Hence video recording is
stopped and storage cannot be accessed.

Free Capacity

Delivers the free space on the RAID volume.

Used Capacity

Delivers the used space on the RAID volume.

Usage

Delivers the percentage of the RAID volume’s usage.

Update Time

Delivers the time when the RAID volume was created or last updated.

Number of
Devices

Delivers the total number of disks covered by the RAID volume and the number of the disks
that are active, failed or spare.

Format Process

Delivers the formatting progress if the RAID volume is being formatted at the moment.

Recovery
Process

Delivers the recovery progress if the RAID volume is being recovered at the moment.

To run

SMART Test

, select disk and click the

Test

button.

Click the

Stop Test

button to stop the test.

Click the

Drive Health (SMART) status

to view the details of SMART result.

Содержание 8HDD Series




































































































Результаты поиска

Содержание 8HDD Series

Отзывы:

Похожие инструкции для 8HDD Series

Бренды по названию

Популярные бренды

Zavio 8HDD Series, Руководство пользователя

Результаты поиска

Содержание 8HDD Series

Отзывы:

Похожие инструкции для 8HDD Series

Бренды по названию

Популярные бренды