Zavarivanje Ltd.
User Manual: WALTER TIG2000
page 20 of 24
Safety Regulations and Precautions
Before starting the welder, it is indispensable for the staff responsible to read and
understand all the WARNINGS and all the CAUTION and DANGER indications
listed in this manual. Nevertheless, the manufacturer cannot foresee all the possible
circumstances which may lead to potential risks in the effective conditions of use of
the welder. Any operations and/or procedures for maintenance not expressly
recommended or indicated in the user manuals must always be notified to and
approved by the Manufacturer. In the event that a procedure not specifically
recommended needs to be applied, the user is responsible for assuring that such
procedure is safe and does not cause harm to persons or things. The manufacturer
declines all responsibility for damage to persons or things deriving from inobservance
of the safety regulations.
SAFETY
-
Do not permit incompetent persons or without adequate training to use the
welding set.
-
Do not permit children or animals to approach the welding set when it is in
operation.
-
Do not access the welding set with wet hands, since it is a potential source of
electric shock if improperly used.
-
Any inspections of the welding set must be carried out with the engine off.
Inspections with the engine on are to be carried out by specialized personnel only.
-
Welding gases may contain noxious residues. Never operate the welding set in
inadequately ventilated places.
-
Do not operate the welding set near places with a danger of explosion or fire.
-
Do not allow access to persons wearing a pacemaker because of possible
electromagnetic interference with the device.
-
In the event of fire, use a homologated fire extinguisher and never use water.
-
Use protective gloves and head-mask at all times.
-
Never leave inflammable liquids or cloths soaked in inflammable liquids on or in
proximity of the work-piece being welded.
-
Take the necessary precautions to prevent the danger of electrocution.
-
Check that the earthing system has been installed and constructed in accordance
with regulations.
-
Never use worn-out or threadbare welding cables.
