Zavarivanje Ltd.
User Manual: WALTER TIG2000
page 13 of 24
Hi/Low Precision setting – menu 13 – DC welding only:
The Walter welder has possibility for setting the precision range in DC welding
to:
HI
or
LOW
, by pressing the buttons or
.
LO
: This mode is recommended for welding in the range of currents
greater
than 10 Ampere
. The user can weld with currents smaller than 10Ampere even
when this value is set to LO, but the welding arc will not be completely stable,
which is why we recommend this setting for currents greater than 10Ampere
HI
: This mode is recommended for welding in the range of currents
smaller
than 10 Ampere.
This welding mode does not support currents greater than
30Ampere
(they can be set, but the output of the welder will never be over 30
Amps).
The precision mode is always visible in the lower right corner of the status line of the
welder LCD screen.
