Zavarivanje Ltd.
User Manual: WALTER TIG2000
page 3 of 24
USER MANUAL FOR WALTER 2000 SERIES WELDERS
photo 1. User interface panel of the Walter TIG AC/DC MIX SERIES
WALTER 2000 COMAND BUTTONS AND TRIMMER:
TRIMMER
: Set the main working welding current. Works in every menu,
and in all welding processes available. Set main welding current is
always visible in the upper right corner of the screen.
MAGIC WAND:
The most important button for operation – used to
calculate all the parameters of welding, according to the set main
current. Push button again, to change welding process (AC, DC or
MMA) and calculate again the parameters, according to the new
process set.
SAVE:
Push-button to save the default welding parameters (to be loaded on
turning-on of the welder), or to be used in menus »save program«
and »load program«.
MINUS:
Push-button for decreasing of the value in each menu. The value
being set in a menu is visible in the upper left corner of the menu.
PLUS:
Push-button for increasing of the value in each menu. The value
being set in a menu is visible in the upper left corner of the menu.
