Zass ZWM 01, Руководство по эксплуатации

Страница: 4 / 12

3. USING YOUR APPLIANCE
4
Before using your appliance for the first time
Clean the plates using a damp sponge rinse and dry carefully.
After applying a fine coating oil to the plates, close the appliance and plug it in. The indicator
light (red) will come on.
Allow it to heat up for several minutes to get rid of the new smell.
Put the plug into an earthed 220-240V~, 50Hz mains socket. The indicator lights (red&green)
will come on
Select the desired temperature using the thermostat (position1-6)
Once the appliance reaches the right temperature, the setting indicator light(green) goes out.
Open the appliance and lightly the oil the plates.
Pour the waffle batter into the center of the hollow part of the pate
Immediately close the appliance, using the handle, so that the batter is evenly distributed over
the whole surface of the plate
Do not hold onto the handle of the appliance during cooking, as this will prevent the batter from
rising.
Note:
During cooking, the thermostat indicator light (green) will come on and got off again at
regular intervals in order to ensure the cooking temperature remains constant. Equally, you
can adjust the thermostat at any time during cooking if you feel that the temperature is not high
enough, or again, is too high.
The cooking time is about 3 minutes and will vary according to the composition the batter.
In any case, it It is advisable to control the degree of cooking with the thermostat according to
your own taste. The quantities and times are given by way of indication only.
Once cooking is complete, remove the waffle using a spatula.
Do not use metallic or sharp, as they could damage the coating on the plate.
If you want your waffles to the plate, select a higher setting on the thermostat or increase the
cooking time
After use, unplug the appliance and allow it to cool down.
2. KEY TO MACHINE PARTS (Page 2)
1
2
- Heat insulated handle;
- Cooking plates;
Place your appliance on a stable, horizontal surface which is heat resistant.
Do not touch the plates with the non-stick coating when the appliance is switched on.
The external surface may become hot when the appliance is in use.
Allow the appliance to cool down before handing it in any way.
All appliances are subject to strict quality control.