![background image](http://html1.mh-extra.com/html/zass/zcm-04t/zcm-04t_operating-instructions-manual_3184289006.webp)
DELAY FUNCTION
If you do not want the coffee maker to start operation immediately, for example now it
is 8:00, you hope that the coffee maker will automatically start working at 13:00, first
follow steps 1 to 5 of “USING YOUR COFFEE MAKER”, and then you can set the
automatic start function as follows:
1. Set the current time that is 8:00 by pressing the buttons of “Hour” and “Min”.
Note: The time cycle is 24 hours.
2. Press Prog button once, Prog indicator flashes in green, the LCD display indicates
“12:00” flickeringly. Set the automatic start time that is 13:00 by pressing the buttons
of “Hour” and “Min”.
3. Press the Prog button again, the Prog indicator illuminates in green solidly. After a
while, the LCD display indicates the current time.
Note: You may cancel the automatic start function by pressing Prog button. If you want
to change the automatic start time, only following the above steps 2-3 again.
4. When the time is due, the On/off indicator will illuminate in red and the appliance
starts brewing. When the process is finished, if you do not want to serve immediately,
keep the coffee maker be energized, the coffee can be kept warm on the warming
plate. And the appliance will shut off automatically after 40 minutes from the On/off
indicator illuminates in red if it has not been manually disconnected at the completion
of brewing. For an optimum coffee taste, serve it just after brewing.
Note: During brewing process, the buttons of “Prog” ,“Hour” and “Min” are invalid.
4. CLEANING AND MAINTENANCE
1. Clean all detachable parts after each use in hot sudsy water.
2. Wipe the exterior surface of unit with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the above area of the funnel and drip onto the product
base during brewing. To control the dripping, wipe off the area with a clean, dry cloth
after each use.
4. Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to
clean it.
5. Replace all parts and keep for next use.
Be sure to unplug this appliance before cleaning. To protect
against electrical shock, do not immerse cord, plug or unit in water
or liquid. After each use, always make sure plug is first removed
from wall outlet.
6
Содержание ZCM 04T
Страница 2: ...1 3 4 5 2 6 1 7 2 3 4 5 B A 6 8 9 10 7...